ThomasKirk

About ThomasKirk

http://outaspace.com.au

Posts by :

, ,

How to Service a Vehicle – A Simple Checklist

Every individual that owns a vehicle knows the importance of regular servicing. However, if you just got hold of your first car and have no prior experience of vehicle ownership, you might want to understand the basics of car maintenance, in order to prevent an unexpected breakdown or worse, in the long run.

A Step-by-Step Guide to Servicing Your Vehicle at Home:

Getting your vehicle serviced by the professionals is recommended at all times. However, if you plan on saving a few bucks, here is a simple checklist that will help you cover the basics, without damaging the car.

  • The primary objective of servicing a vehicle is to check for wear and tear and replace the parts that have worn out. Check the brake fluid, oil filters, air filter, wheel alignment and balance, tyre pressure, spark plugs and battery fluid levels, etc. while you’re at it.
  • You need to get hold of a proper tool kit and your vehicle’s User Manual before you proceed.
  • It helps if you have a ramp at home, which most people don’t, so you’ll have to manage with a jack screw. Check for any damage on the underbody, but be careful not to disturb the jack supporting the vehicle.
  • You need to change your vehicle’s engine oil periodically. The duration varies from one manufacturer to the next and you will find the drain interval in the User Manual. Make sure you do not cross the recommended level while pouring, as it takes a while to drain out. Wait for the oil levels to settle down.
  • Never keep the engine running while inspecting the oil levels in your car. In order to replace the oil, you need to loosen the bolt and allow the oil to drain out of the engine compartment. Allow the oil to flow out evenly before you tighten the nut. You might need to change the oil filter periodically and it is usually present in the adjacent chamber. Install the correct make and model, as mentioned in the User Manual.
  • Next, unscrew the spark plugs from the engine and clean up with a clean cloth. The plug points need to be cleaned with sand paper. Clean till the two points shine, then put them back in.
  • The air filter comes next. This is a relatively easy process and you can use a vacuum cleaner to get the job done.
  • The suspension is an important part of your vehicle and it is necessary to keep them in proper working condition at all times. Bump the car from one side and check how long it takes for the vehicle to settle down. Ideally, the vehicle should settle down after three consecutive bumps. Check for the suspension fluid levels and signs of leakage in the shock absorbers.
  • Check the brake fluids next and top up till the recommended level. Check the brake shoe by removing the assembly and get a replacement if the current ones are worn out.

I would still recommend you get your vehicle serviced by the professionals at your local tyre shops. However, with sufficient experience, you could work on the basics occasionally and save a few bucks. Never bite off more than you can chew!

,

Looking For Mag Wheels Brisbane? Read This First!

So you are looking for a reputable wheel specialist? Before you lock down on your desired mags, there are a bunch of questions that you should ask.

What types of mag wheels are available? Which mags have the best performance? What type of wheel is going to suit your requirements?

The wheels on a car definitely help in enhancing the overall statement. Not only do they impact the aesthetics, wheels are also important for the performance and safety of your car. Since wheels are the single point of contact between your car and the road, it is crucial to opt for the best quality in order to fit your requirement.

If you are more of a long distance driver, then you should opt for premium quality wheels, because good wheels will give you more security and better fuel efficiency.

What is The Difference Between Mag Wheels and Steel Wheels?

Generally, most car wheels are made out of steel. These are made for resistance. They have no aesthetic appearance. Over the past few years, people are becoming more image conscious when it comes to their rides. Alloy wheels are typically made out of Aluminum and other metals and are called Mag Wheels, and many other parts of the world.

How to Choose your Mags?

Due to the increasing number of different car manufacturers and models, selecting the right mag wheels for your vehicles may be a cumbersome process. If you are not sure about what type of mag wheel you should purchase, you should consult a certified rim dealer. An Expert should be able to narrow down your list of options based on a number of factors like, general driving weather conditions, terrain, purpose and type of vehicle.

There are two options for shopping for Alloy Wheels

1. Wheel Refurbishment: This option is for people who want to keep their existing wheels and tyres. You need to find out the size of your tyres. Once you know the size of your tyres you can get your wheels refurbished. This option will allow you to keep your existing tyres and enjoy the benefits of Mags.

2. New and Bigger Alloys: The second option is obviously for people looking for a new set of wheels. If you want bigger Mags for your car, then you have to source both the new kumho tyres online and alloys. Thus, you have the option for searching for new alloy wheels and sizes.

As technology advances, aluminum wheels are slowly becoming cheaper as manufacturing improves. These are the best options for your vehicle. Talk to a dedicate tyre expert here, to know more about selecting the right Mag Wheels Brisbane.

,

Taking Care of Rims and Tyres for Your Everyday Car

If you are looking for the best possible sales and purchases regarding your wheel and tyres, you should try purchasing them in spring or autumn. There are various kinds of special discounts and price-cuts offered during these seasons.

Furthermore, there are many different kinds of rims and tyres that should help with the weather as well as road conditions. You should think about your area and also the weather condition through which you will be driving your vehicle.

Services related to wheels and tyres

When you are investing for tyres in summer, you should choose some that not only withstands a good amount of heat but also extreme road conditions like dirt and mountain roads along with rain, heat and many other cases. At the same time, road construction is a very important thing that needs to be considered.

There are many reasons for you to invest in a new complete set of wheels and tyres. Furthermore, when you are buying new nitto tyres, it will never be a financial burden. There are many ways through which you can get the special discounts and deals on various tyres and wheel sets.

Choosing the correct wheels and tyre sets over time

There are many consumers who wait for a long time and they can only be bought one at a time. As a result, by the time the first set of XXR 527 wheel and tyres are worn out and old, it will be time to replace them again.

The first important fact which you need to consider is check out the tyres which need to be replaced. For an ideal solution, you should replace all the car tyres at the same time. This is not too practical since the front and rear rims and tyres do not wear at the same time. However, some mechanics will recommend that you change the front and rear tyres at the same time for the perfect price as well as performance.

Maintenance and checking of your tyres

Most of the tyres should have the ability to last five to six years with proper rotations, maintenance and excellent wheel balancing. Therefore, you should not wait too long to change out and replace your tyres. Always take your car for checkup or do this simple check up yourself.

You should not wait till the tyre is completely bald in order to change them out. When you are driving on tyres with too little tread, it can be literally quite dangerous for you. The handling will be greatly affected by the loss of treads and the tyres will be more fragile and susceptible to blowouts and flats.

Stability of your tyres

There are also times when stability needs to be properly maintained and this is mainly needed during emergency braking or sudden swerves on your end. On the rear axle, you should always fit the newest or the least-worn out Tyres.

Keeping an eye out for accidental damages to your tyres is absolutely necessary because in that case, they will severely shorten the life span of your tyres to a great extent. When you are buying a set of new rims, tyres and nudge bars, you should purchase five tyres. They should always be pumped at the right pressure and should be checked regularly as well. Only then will your tyres stand out for a long time.

,

Tips for Buying 4WD Mag Wheel Packages Online

In some cases, 4WDs just need new rims. Maybe, the old wheels are damaged, or they just don’t look like you want them to. Whatever your reason for considering 4WD mag wheel packages, you can’t just buy any set of wheels—fitment is important. In this guide, you’ll learn how to choose the right wheels, and you’ll also learn how a mismatched set of alloys can cause real problems down the road.

Variables in Tyre Selection

There are a few variables to consider when selecting the right wheels for your 4WD. When you know the correct measurements for your vehicle, it’s easier to find the right wheel and tyre package. These measurements include:

  • Tyre width. It’s measured from the sidewalls, and given in millimeters. Most wheels can only hold a limited range of tyre widths. Wider tyres typically offer better handling, but they’re often more costly and they can decrease fuel economy.
  • The ratio of tyre width to sidewall is given as a percentage of the overall width of the tyre. For instance, if the ratio is 75, the sidewall height is 75% of the tyre width. Shorter sidewalls increase handling, but they can leave rims more vulnerable to damage.
  • Wheel and tyre diameter must match. Diameters are typically between 14 and 18″, but measurements can change with aftermarket alloys. A larger rim offers increased handling, but they are more costly.

Benefits of Plus Sizing 4WD Mag Wheel Packages

Plus size mags can improve a vehicle’s handling, steering, cornering and style. Bigger tyres create a larger area of contact with the road, and sidewalls are shorter. There are three ways to size up: plus zero, plus one and plus two. New tyres are typically more expensive than the old ones, and you may need to buy a spacer or other adapter to get wider tyres to fit your vehicle.

Finding Wheels and Tyres Online

Now that you know a little more about 4WD wheels and tyres, you can start your search for the perfect set. You will need some basic information about your vehicle, such as its make and model. By researching sellers that are having a rims sale before you buy, you can be assured that you’ll get just what you’re paying for.

Getting the right alloys on your 4WD is important in the vehicle’s style and handling. It’s important that 4WD mag wheel packages fit properly, and we hope the info we’ve provided is helpful. By considering what you’ve learned here, you can greatly simplify the wheel buying process.

Back to top